Install video

TGR2-X1 — 5-Minute Install

No ads. No competitor recommendations. Watch at the tank, then follow the steps below.

Standard Kit: Uses the dedicated anode port with included 1-1/16" and 1-3/16" sockets. Bradford White tanks? Switch to BW Kit or see the compatibility guide.

Bradford White Kit: Follow the tee-fitting branch in this video and the written BW steps.

Quick steps

1. 1Prepare — Shut off power and water. Drain 2–3 gallons.
2. 2Swap — Remove the old rod. Wrap threads with PTFE tape. Install TGR2-X1.
3. 3Connect — Refill, plug in the adapter, attach the ground clip. Confirm green LED.